Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

iPhone Screen Replacement - Step-by-step

Just about the most complex repairs by using an iPhone can be a screen replacement repair, before you attempt this repair make sure you plenty of time and energy to complete the task, this will let you clear working space to your iPhone and also the replacement screen to sit down all the while working on them.

For any replacement screen correct it is essential to fully disassemble the iPhone, well, i indicate that prior to commencing the repair get yourself a few small items of paper so that you can label your parts, and I particular the cause from the screws. Label them the subsequent; Metal Back Screws, aluminum back case, and motherboard - lay them out on the workspace within this order having a small space together for that other iPhone components and replacement screen to lie in.


The various tools and equipment necessary for this repair are; an instance opener, a tiny Phillips screwdriver, a paperclip to eject the SIM tray and also the iPhone replacement screen, once you have those to hand as well as the paper labels lined up. Make sure to have clean hands before beginning the iPhone screen repair in Ascot.

Firstly eliminate the SIM tray - do this by inserting the paper clip in the hole on the topside of the iPhone beside the power button, if the clip is inserted, the SIM tray should eject. Next, utilize the case opener to get rid of the plastic back with the iPhone. Lay those two components next to the paper labels, after you have fitted the replacement screen into your iPhone you need to turn back order of such instructions to reassemble the iPhone. Because of this, I would suggest placing them furthest by you next to the aluminum paper label.

The next thing is to eliminate the two small screws on either side from the back securing the metal casing, and yet another screw located top, middle of where you removed the plastic back - placing these about the paper label. After you have completed this, take the case opener again and thoroughly run it along each side of the iPhone to loosen the trunk away from the frame - you will see the metal back is secured by way of a wire ribbon, carefully detach this in the main area of the iPhone, not the metal back end.

The next step within the screen replacement repair needs caution - it is needed to remove the iPhone antenna cable, secured by glue in three positions, carefully pry it loose from the glue spots. Following this, you will have to remove 10 screws from round the sides with the iPhone, and place them around the paper label 'Outside Case' - following this take away the 3 screws securing the motherboard. You need to eliminate the motherboard simultaneously because the battery as they are soldered together, after you have performed this it is possible to carefully detach the rest of the iPhone frame.

The next step is to get rid of the LCD screen to be able to fit the replacement screen - this really is most likely the most difficult part of the repair and requirements to be done with extreme care. Loosen the three clips around the sides of the screen and slowly begin detaching the LCD, you will see some wires are intertwined to the Iphone - carefully guide them with the frame and, they will slide right through.

Once you've completed this, take the iPhone screen replacement and insert it in to the phone, carefully trace your steps to make sure that no errors are created when assembling the iPhone back to its original state.
Sign In or Register to comment.